Heze wood mold inhibitor factory

Muzhibao - Concentrated wood mildew remover
1. Product introduction:
Muzhibao - Concentrated wood mildew remover is a high-content wood remover newly developed by Weixin Linhua Mildew agent, it has the ability to quickly eliminate mold, does not destroy the strength of wood fiber, does not change the original color of wood, is non-toxic and has no irritating smell, is safe and environmentally friendly, and is mainly aimed at wood caused by high temperature and humidity during the rainy season. Mold and mildew spots appear on boards, wooden craft products, packaging boxes, pallets, furniture boards, etc. due to high moisture content caused by improper wood storage or delayed drying. The color of the treated wood It can restore the original color of wood, and its treated area can ensure that there will be no secondary growth of mildew permanently. Muzhibao-concentrated wood mildew remover is currently the most effective, with the highest content and the deepest penetration on the market. Strong, the most convenient to use concentrated wood mildew removal product
2. Main ingredients:
The main ingredients of Muzhibao - concentrated wood mildew remover are: mold decomposition oxidant, mold removal reducing agent, surface activity Agents, composite antibacterial agents, etc. do not contain formaldehyde, heavy metals and other toxic and harmful substances. They comply with the new European standards for export
3. Scope of application:
Muzhibao - concentrated wood mildew remover is mainly suitable for the rainy season The wood becomes damp due to high temperature and humidity, or the moisture content is too high due to improper storage and delayed drying of the wood. Trichoderma, Penicillium, and Aspergillus niger appear. Aspergillus aflatoxin occurs due to the high flour protein added to the plywood glue. , the removal of white rot fungus, Mucor and other mold hyphae, which is widely used in boards, furniture wooden crafts, packaging boxes, pallets and other finished products, semi-finished products and other wooden materials
Four: Implementation standards: National standards
Five: How to use:
Before operation, first clean the attachments on the wood surface. You can use brushing, spraying, soaking, vacuum pressurization and other operating methods:
For the slight mildew that has just appeared on the wood surface , mildew spots, mildew spots and other phenomena, when using the brushing method: Use a brush or sponge to evenly apply Muzhibao-Concentrated Wood Mildew Remover (can be diluted with water appropriately according to the mildew situation, the dilution ratio is one part of mildew remover When operating with water, the wood surface should be completely wetted (standard), and the whole thing should be covered with a plastic sheet (preservation film). Leave it to cool and dry naturally for an hour in a well-ventilated place. After the wood mildew is eliminated, post-processing can be carried out.
If the wood is severely moldy, has a long mildew cycle, the surface is rotten or the wood mold mycelium has completely penetrated into the wood fiber conduit, it needs to be treated twice. When using the brushing method: Use a brush or sponge to evenly apply Muzhibao - Concentrated Wood Mildew Remover Stock Solution - times (the interval between each application is hours). During operation, the wood surface is completely wetted as a standard. Cover it with plastic sheet (preservation film) and place it in a well-ventilated place to cool and dry naturally for an hour. After the wood mildew is eliminated, it can be processed later
For the slight mildew, mildew spots, etc. that have just appeared on the wood surface. Mildew spots and other phenomena - when using the soaking method - water can be diluted appropriately according to the mold situation. The dilution ratio is one part mildew remover to one part tap water. Soak the wood for about 3 minutes. The mildew spots on the wood will disappear and the original color of the wood will be restored.
. When the wood moldy situation is severe and the moldy cycle is long, the surface is rotten or the wood mold mycelium has completely penetrated into the wood fiber conduit, when using the soaking method - water can be appropriately diluted according to the mildew situation, and the dilution ratio Soak 3 parts of tap water for one part of mold remover. The soaking time is about 3 to 3 minutes before the wood mildew spots disappear and the original color of the wood is restored
Six: Precautions:
Because this product is high Molecular treatment agents, please avoid mixing them with reducing, acidic, alkaline and organic solvents
. If you need to treat painted products, please be sure to clean the paint film on the wood surface before using this product
br/> This agent can be recycled. When using the soaking method, please ensure that the agent completely covers the wood and ensures the fluidity of the agent so that the agent can completely penetrate into the wood. It is recommended that the number of times of the agent be blended each time should not exceed If you continue to use it, it is recommended to add no less than the total amount of the original drug for reactivation to ensure that the drug continues to exert its effect
. If the temperature is lower than ℃, the product will crystallize. Please leave it aside during storage. In places above ℃, just place it in a cool place and avoid direct sunlight or high temperatures to ensure product efficacy and stability
. Effective use period at room temperature: months